Digging a trench for sprinklers or for an irrigation system is no easy feat — at least, not with a shovel! However, a Power Planter auger can make that task much faster and easier. If you’d like to do the job yourself, consider an auger, which can help you get the job done without needing to rent expensive trenching equipment or hiring a professional. We’ll show you how.
Digging an Irrigation Trench: What You Need to Know
Most trenching for a sprinkler system needs to only be 8-12 inches deep. If you live in a climate where the ground freezes, then it must be a maximum of 18 inches. It’s a job that can be costly if you hire a professional, so it’s one task that you may want to DIY.
With an auger, the job is simple. Once you have the plan laid out for the irrigation system, you’ll need to dig a pilot hole where the piping for the water lines begins. Make sure that this small portion of the trench is long and wide enough to fit the length of your auger and the drill to which it is attached. From there, you need only drill horizontally using an auger in the correct diameter to fit the size of the plumbing you are using.
Why DIY Trenching for an Irrigation System?
The biggest reason that a homeowner might want to turn this undertaking into a DIY project is cost. Hiring a professional for this job can cost hundreds or even thousands of dollars, depending on how extensive the sprinkler system is, but in actuality, it’s a relatively simple task to complete yourself. You can save a lot of money on labor.
Another reason why you might want to tackle this project is your landscaping. Contractors work on time frames. Thus, if you are digging a trench for a sprinkler system beneath existing plants, they may want you to remove those plants before they begin the job — otherwise, you’ll risk damaging the landscaping during installation.
Installing a sprinkler system yourself allows you to work at your leisure and take every precaution needed to safeguard carefully tended flowerbeds.
Why Choose a Power Planter Auger?
There are lots of reasons to make Power Planter’s augers your tool of choice. For starters, they’re versatile. Even if you make the purchase with digging a trench for irrigation in mind, this is still a tool that you can use to plant bulbs, annuals, vegetables and other plants within your landscape. These augers can also be used to mix paint, dig holes to set posts and a variety of other tasks.
Our augers are hand-welded and made with high-quality materials that will last you a lifetime. That’s why our augers are backed by an unconditional guarantee on craftsmanship, materials and parts. Few other auger brands offer this kind of protection against defects.
If you’re ready to make a purchase, feel free to browse our website and check out a variety of augers in all lengths and widths. If you have questions about which auger may be best for digging an irrigation trench or whatever other needs you have, don’t hesitate to contact us!