Designed with the needs of the professional landscaper in mind, this auger delivers the strength and durability you need to plant 5-inch and 6-inch potted plants with speed and efficiency. Its double 10-gauge flighting design makes it twice as fast as augers with a single-flighting construction. Choose the HDT (Heavy-Duty Tip) option for digging in dense compacted soil. Drill sold separately.
Compatible Drill Drive Type(s):
This area is only available to wholesale partners.
Most drills typically come in 2 chuck sizes: 3/8-inch or 1/2-inch. This measurement refers to the width of the connection point between the drill and auger (or drill bit). Most drills will display their size in the fine print on the side of the drill or drill chuck (see pictures). A 3/8 inch drill chuck will ONLY accommodate our 3/8 inch bit offerings. A ⅜ inch auger can function inside of a drill with a larger ½ inch chuck.
For best results, however, we advise against using a 3/8 inch auger with a 1/2 inch hex drive drill when digging in densely compacted soil as a 1/2 inch drill generally has much more torque and could result in damage to the smaller 3/8 inch hex.
Heavy Duty Digging
When you are digging through rough soil with small rocks or dense clay soil we strongly advise using a drill and auger with a 1/2-inch hex drive to increase safety and torque. Additionally the drill should have a minimum power rating of 18 volts or more. For digging wide or deep holes in dense soil a gas powerhead or drill with a 60V power rating is suggested. Most drills will show the power rating in fine print on the side of the drill or on the battery itself (see pictures). 60V cordless drills are generally safer than gas powered units as they include a clutch which prevents injuries. Gas powered units are usually absent of any such safety feature.
Tube drives are designed for heavy duty applications. They are available for the larger auger sizes and are typically used by professional landscapers. A specialized drill or powerhead with a tube attachment must be purchased. A tube drive auger can be connected to a standard ½ drill chuck with the help of an adaptor.
Most drills come in 3/8 or 1/2 inch sizes.
Chuck size can sometimes be found on the chuck.
Chuck size and voltage can also be found on the the side of most drills.
Voltage or power ratings can be found on the battery unit.