Drill Augers

Selection Guide

STEP 1: PICK HOLE SIZE
STEP 2: PICK SHORT OR TALL
STEP 3: PICK AUGER GRADE
Soil or Use
Plant Type / Best Use
Availability

Showing results 1-29 of 29 filtered products.

×

Selection Guide

STEP 1: PICK HOLE SIZE
STEP 2: PICK SHORT OR TALL
STEP 3: PICK AUGER GRADE
Soil or Use
Plant Type / Best Use
Availability

Showing results 1-29 of 29 filtered products.

*Drills sold separately

*Drills sold separately

*Drills sold separately

*Drills sold separately

*Drills sold separately

*Drills sold separately

*Drills sold separately

Video Reviews

Frequently Asked Questions

How Does a Drill Auger Work?

A drill auger works by rotating a sharp, spiral bit through the soil as it is pushed or driven into the ground. The blade of the dirt auger cuts through the soil, lifting it up and out, creating a hole as it goes.

What Kind of Drill Do I Need for an Earth Auger?

Most cordless drills within a range of 18V-60V will work with our drill augers, depending on the diameter and length of the earth auger, as well as its intended uses. Our earth augers do not adapt to sockets or impact drivers, nor do we recommend trying to use them due to safety and efficiency factors. For more information, see our drill power page.

Can a Power Planter Drill Auger Dig Through Clay Soil?

Yes. Power Planter augers for drills are tough enough to dig through stubborn, compacted clay soil. Our large-diameter heavy-duty augers are best suited to the challenge compared to their smaller counterparts. They not only dig through the clay but break it up simultaneously.

Is It Safe to Use a Drill Auger Near Utilities?

No. It is not safe to use a drill auger near utilities without proper precautions. Before digging, it’s vital to know the location of underground utilities such as gas, water, and electric lines. Hitting these can cause serious injury and damage. Always call your local utility companies or a “Call Before You Dig” service to mark the locations of underground utilities in your area before using the drill auger.

What Do I Do If I Hit a Hard Patch of Ground or Rocks When Using My Power Planter Drill Auger?

First, don’t force the auger. It’s designed to handle tough soil, but hitting rocks could damage the tool. If you encounter a hard patch or rock, stop drilling, remove the auger from the hole, and try to remove the obstruction before continuing. If there is no obstruction, just hard ground, try leaning the auger at a slight angle while drilling. This will often get the teeth to bite into the hard ground again.