Daffodil Bulbs are 50% off. Shop Now. 

Free help & advice Take Auger Quiz

Gift cards now available Learn more

GroundGrabba Ground Anchors

A screw-in ground anchor drills into the soil like a large screw, so it grips far harder than a hammer-in stake and comes back out when the job is done. Shop GroundGrabba heavy-duty ground anchors for tents, canopies, carports, swing sets and signs, and drive each one in seconds with a cordless drill and the matching hex driver.

View as

Which Screw-In Ground Anchor Do I Need?

Anchor Ground Best for
GroundGrabba Lite Sand and loose, soft ground Beach and dune canopies, pop-up tents with angled rope tension
GroundGrabba Junior (11") Normal to harder ground Tents, tarps and camping setups
GroundGrabba Pro (12") Most ground types Canopies, patio furniture, signs, swing sets
GroundGrabba Pro I (18") Most ground types, including sand Vendor tents, gazebos, pop-up carports
GroundGrabba Pro II Most ground types, including sand and mud Beach and wet/soft-ground setups
Commercial Grade anchors (18", 24", 36") Industrial and commercial jobs Festival tents, large shade structures, outdoor lighting
Complete Ground Anchor System Soft or sandy ground Tiny homes, site offices, shipping containers

How to Choose Heavy-Duty Ground Anchors

Match the ground: use the Lite in soft sand only. The steel Junior and Pro anchors handle normal to hard ground, and the Pro I and Pro II also hold in sand.

Match the load: for heavy loads or anything commercial, choose the thicker Commercial Grade anchors and check the GroundGrabba Commercial Anchor Calculator.

Pick the right driver: each anchor screws in with a cordless drill and a hex driver: 5/8" for the Pro series, 15mm for the Junior and 3/4" for the Lite, and a 1" socket driver for the Commercial anchors. Many of our ground anchor kits include one.

Hard ground: pre-drill a 1/2" pilot hole with a masonry drill bit first. Step-by-step help is in our guide on how to install ground anchors with a power drill.

FAQs

What is a ground anchor screw?

A ground anchor screw, also called a screw-in ground anchor or auger anchor, is a steel or nylon stake with spiral flights. You drive it into the ground with a drill, and the flights lock into the soil so it resists being pulled out.

How much weight can a ground anchor hold?

It depends on the anchor and the ground. In GroundGrabba's vertical load tests, the 36" Commercial Grade anchor held 1,120 lb in grassy, sandy soil and more than 2,200 lb in mixed clay. The 11" Junior held 80 lb in grass-topped compressed sandy ground, against 37 lb for a hammer-in tent peg.

What is the best heavy-duty ground anchor?

For most home and event jobs, the GroundGrabba Pro range: the 12" Pro for most ground and the Pro I or Pro II when you also need to hold in sand. For industrial or commercial loads, choose the Commercial Grade anchors with their thicker shafts.

Compare /5

Loading...